Nové 
Zobrazit větší
Zobrazit větší 
Osram Powertronic PTi-S 50W
OSPTIS50
Nový produkt
Elektronický předřadník vhodný pro všechny halogenidové výbojky z našeho sortimentu.
Více informací
Výborný a tichý předřadník pro výbojky značky OSRAM.
Průměrná životnost až 50 000 hodin.
Délka 110 mm, šířka 75 mm, výška 30 mm.
| Lamp wattage | 50 W |
|---|---|
| Line current | 0.24 A |
| Ignition voltage | 4.5 kVp |
| Operating frequency | 0.200…0.240 kHz |
| System wattage | 54.50 W |
| ECG efficiency | 92 % |
| Input voltage AC | 198…264 V |
| Nominal voltage | 220…240 V |
| Mains frequency | 50…60 Hz |
| Power factor λ | 0.95 |
| Inrush current | 45 A |
| Max. ECG no. on circuit breaker 10 A (B) | 7 |
| Max. ECG no. on circuit breaker 16 A (B) | 13 |
| Max. no. of ECGs on 16A MCB with EBN-OS | 32 |
| Protective conductor current | 0.25 mA |
| U-OUT (working voltage) | 250 V |
| Max. working voltage between LH and LL | 250 V |
| Max. working voltage betw. LL/LH & earth | 250 V |
| Max. capacitance of wire ECG/lamp | 120 pF |
Dimensions & weight | |
|---|---|
| Length | 110.0 mm |
| Width | 75.0 mm |
| Height | 30.0 mm |
| Mounting hole spacing, length | 99.0 mm |
| Mounting hole spacing, width | 64.0 mm |
| Cable cross-section, input side | 0.5…2.5 mm² |
| Cable cross-section, output side | 0.5…2.5 mm² |
| Wire preparation length, input side | 10…11 mm |
| Wire preparation length, output side | 10…11 mm |
| Product weight | 255.00 g |
Colors & materials | |
|---|---|
| Casing material | Metal |
Temperatures & operating conditions | |
|---|---|
| Ambient temperature range | -25…+60 °C |
| Maximum temperature at tc test point | 85 °C |
Lifespan | |
|---|---|
| ECG lifetime | 50000 h |
Additional product data | |
|---|---|
| Design / version | Built-in unit |
Capabilities | |
|---|---|
| Max. cable length to lamp/LED module | 1.5 m |
| Overheating protection | Power reduction and switch off at T > 85 °C at the tc point |
| Overvoltage protection at 275…300 V | 48 h |
| Overvoltage protection at 300…320 V | 2 h |
| Overvoltage protection at 320…350 V | 5 min |
| ECG reset time | > 0.5 s |
| Dimmable | No |
| Restriction on ignition time | 20 min |
| Suitable for fixtures with prot. class | I |
Certificates & standards | |
|---|---|
| Approval marks – approval | ENEC 10 |
| Approval marks – approval | VDE |
| Approval marks – approval | VDE-EMC |
| Approval marks – approval | EAC |
| Approval marks – approval | C-Tick |
| Type of protection | IP20 |
| EEI – Energy Label | A2 |
| Standards | Acc. to EN 61347-2-12/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547 |